Hamilton Beach Portable Ice Maker Instruction Manual

Hamilton Beach Portable Cover

To ensure proper use and for your safety, please read the following instructions completely before operating this appliance.

Congratulations, you have acquired a high-quality Hamilton BeachTM Portable Ice Maker. This product allows you to make ice cubes and has many features that you will find convenient to use. Please record the model number, serial number, and the manufacture date, which can be found on the label on the back of the unit.

____________________________________________________________________ model number serial number manufacture date date of purchase

READ ALL INSTRUCTIONS BEFORE USING! SAVE THIS MANUAL FOR FUTURE USE! No product registration is required for this unit. When making a customer service call, please have the model number, manufacture date, and serial number on hand. CUSTOMER SERVICE: 1-800-256-8169

Parts and Features

  1. Viewing Window
  2. Cover
  3. Control Panel (see close up)
  4. Air Outlet
  5. Air Inlet
  6. Water Outlet
  7. Power Cord
  8. Ice Storage Basket
  9. Metal Fingers
  10. Ice Making Area Parts and Features 1Parts and Features 2Pontral Pane

CONTROL PANEL CLOSE UP

SAVE THESE INSTRUCTIONS!

Grounding Instructions

Getting familiar with your Hamilton Beach

Proper Installation and Location

Preparing, Loading and Operating Your

Portable Ice Maker

  1. It is advisable to clean the unit prior to first use. See the cleaning instructions on page 6.
  2. Ensure the Water Outlet (see # 6 on Parts and Features list) on the back of the unit is secure.
  3. Plug the Portable Ice Maker into the outlet and the Power Indicator Light (see C on the Parts and Features list) will turn on.
  4. Open the Cover (see #2 on the Parts and Features list) and remove the Ice Storage Basket (see # 8 on the Parts and Features list).
  5. Fill the water reservoir up to the MAX water level mark. Use only cold or room temperature drinking water for making ice. Do not pour hot water into reservoir. Do not fill above the MAX water level mark.
  6. Replace the Ice Storage Basket and close the Cover.
  7. Press the Power Button (see D on the Parts and Features list) on the Control Panel to start making ice.
  8. The “Ice Storage Basket Full” Indicator Light (see A on the Parts and Features list) will turn on when the Ice Storage Basket is full and the unit will stop making ice automatically. Once the ice has been removed from the Ice Storage Basket and the Cover closed, the ice making cycle will continue automatically.
  9. The “Add Water” Indicator Light (see B on the Parts and Featured list) will turn on when the water reservoir is empty and the ice making cycle will stop automatically. Add water to continue using the unit.

Proper Care and Cleaning of the Portable Ice Maker

Cleaning the Ice Storage Basket and Scoop The Ice Storage Basket (see # 8 on the Parts and Features list) and scoop should be removed and cleaned regularly to remove spotting and mineral deposits.

  1. Remove the Ice Storage Basket by pulling it up and out and rinse with clean water.
  2. Clean using a mild soap and warm water mixture. For tough deposits add vinegar and let soak until the deposits come loose. Then wash, rinse and dry thoroughly.
  3. To replace the ice storage basket, simply slide the basket back into the reservoir.
  4. Repeat steps 1 & 2 for the ice scoop.

Cleaning the Water Reservoir and interior of the Portable Ice Maker IMPORTANT NOTE: Do not clean the Metal Fingers (see #9 on Parts and Features list). Make sure the unit is unplugged before attempting to clean and allow it to warm up to room temperature.

  1. Unscrew the cap of the Water Outlet (part # 6 on Parts and Features list) and drain all the water into a sink or bucket.
  2. Remove the Ice Storage Basket.
  3. Pour clean water into the reservoir, and use a clean cloth to wipe down the sides of the reservoir. Allow all of the water to flow out of the Water Outlet and replace cap.
  4. Note: For tough deposits add vinegar to the water and let soak until the deposits come loose.

Self-Clean Mode Operating Instructions

The Self-Clean mode should be put into operation before you use your Portable Ice Maker for the first time and/or if there has been a long period of time without use. The Ice Storage Basket Full Indicator Light, Add Water Indicator light, and Power Indicator Light (see A, B, and C on the Parts and Features list) will be on at the same time when the unit is in Self-Clean mode.

Stage 1

  1. Add equal parts of water and vinegar (1:1) to the unit’s reservoir.
  2. Press the Power Button (ON/OFF) (see D on Parts and Features list) repeatedly for at least 5 seconds to activate the Self-Clean mode. Note: Self-Clean mode will start automatically after the “Beep” sound.
  3. During the Self-Clean mode, the Ice Making Area (see # 10 on the Parts and Features list) is filled and emptied. The pump will remain in continuous operation as it feeds water to the Ice Making Area and the Metal Fingers (see # 9 on the Parts and Features list). This cycle will repeat itself five times.
  4. Upon completion, the Self-Clean mode will automatically shut off.
  1. Drain the cleaning solution from the reservoir by removing the Water Outlet cap (see # 6 on the Parts and Features list).
  2. Add clean water to the MAX water level mark.
  3. Press the Power Button (ON/OFF) repeatedly for at least 5 seconds to activate the Self-Clean mode again which will now act as a rinse.
  4. Upon completion of this final stage of the Self-Clean process, the Self Clean mode will automatically shut off. Proceed to drain the water from the Water Outlet by removing the cap. Leave the Cover (see # 2 on the Parts and Features list) of the unit open to allow it to air dry. Note: If there is a water shortage during either stage of the Self-Clean mode, the Self-Clean mode will automatically shut off. Add more water and repeat steps 1 - 4.

Troubleshooting the Portable Ice Maker

Problem Possible Causes Solution
POWER Indicator Light is not turning on 1. Portable Ice Maker is unplugged. 2. The fuse is blown/circuit breaker is tripped. 3. Internal components are damaged. 1. Push plug completely into outlet. 2a. Replace fuse or reset circuit breaker. 2b. If too many items are plugged into a single circuit, move some items to a different plug. 3. Call Customer Service.
ICE BASKET FULL Indicator Light is on 1. Ice Storage Basket is full. 2. Low-temperature protection activated. (ambient temperature is lower than 41 degrees F, 5 degrees C). 1. Remove ice from Ice Storage Basket. 2. Move the Portable Ice Maker to a warmer place, where the ambient temperature is higher than 41 degrees F, 5 degrees C).
ADD WATER Indicator Light is on 1. Water Reservoir is empty. 2. Water supply system is damaged. 1. Add clean water. 2. Call Customer Service.
ICE BASKET FULL and ADD WATER Indicator Lights are on at the same time 1. Ice Making Area may be blocked. 2. Internal components are damaged. 1. Check for ice blocking Ice Making Area. 2. Call Customer Service
Ice making performance is poor 1. Air Inlet/Outlet is blocked 2. Water temperature is too high. 3. Ambient temperature is too high. 4. Refrigerant is leaking and/or Refrigerating system is damaged. 1. Clean the Air Inlet/Outlet (see # 4 and 5 in Parts and Features list). 2. Fill with room temperature water 3. Move the Portable Ice Maker to a cooler place, where the ambient temperature is lower than 95 degrees F (38 degrees C). 4. Call Customer Service.
Portable Ice Maker is noisy 1. Fan or pump is damaged. 1. Call Customer Service.

LIMITED WARRANTY

This warranty applies to products purchased and used in the US and Canada. This is the only express warranty for this product and is in lieu of any other warranty or condition.

This product is warranted to be free from defects in materials and workmanship for a period of one (1) year from the date of original purchase. During this period, your exclusive remedy is replacement of this product or any component found to be defective at our option; however, you are responsible for all costs associated with returning the product to us and our returning a product or component under this warranty to you. If the product or component is no longer available, we will replace with a similar one of equal or greater value.

This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep your original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 115V ~ 60 Hz).

We exclude all claims for special, incidental and consequential damages caused by breach of express or implied warranty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

To make a warranty claim, do not return this appliance to the store. Please call 1.800.256.8169 or 716.235.1300 in the U.S. and Canada or visit hamiltonbeach.com in the U.S, or hamiltonbeach.ca in Canada. For faster service, locate the model, type, and series number is on your appliance.

PRS Enterprises 3349 Monroe Ave., Suite 328 Rochester, NY 14618 Ver. 1.0 Hamilton Beach® is a registered trademark of Hamilton Beach, Inc. used under license by PRS Enterprises. SAVE THESE INSTRUCTIONS!